1550VA Capacity: Powers a desktop, monitor, and networking equipment together, giving small offices a workable buffer during short outages.
Automatic Voltage Regulation (AVR): Corrects voltage sags and surges without switching to battery mode, therefore reducing battery wear and extending its service life.
Overcharge Protection: Prevents the internal battery from being overcharged, which helps maintain battery performance and lifespan over time.
LED Status Indicator: Shows operational status, battery level, and load at a glance, so you can respond quickly if the unit switches to battery power.
Compact, Space-Saving Design: Fits on a desk, shelf, or rack without competing for space, making it easy to place in tight home-office setups.
750VA / 450W capacity: Powers a desktop PC, monitor, or networking setup without exceeding the unit's load limits.
Boost and buck AVR: Automatically corrects voltage sags and surges before they reach your devices. This reduces battery cycling and extends battery life.
Fast switchover (2–6 ms): Bridges the gap between mains failure and battery mode almost instantly. Consequently, most connected electronics don't register the interruption.
Replaceable 12V/7Ah battery: Lets you swap the battery when it ages, instead of replacing the whole unit. This lowers the long-term cost of ownership.
Data line and communication port protection: Guards RJ-11/RJ-45 connections and includes a USB port for status monitoring. This is useful if you're protecting a router or modem alongside a PC.
650VA / 360W capacity: Powers small electronics like routers, modems, and desktop PCs without overloading the unit.
Automatic Voltage Regulation (AVR): Corrects voltage dips and surges without switching to battery. This preserves battery life over repeated fluctuations.
Three 3-pin output sockets: Kenya-standard sockets connect multiple devices at once, so you don't need extra adapters or a separate power strip.
Fast switchover (2–6 ms typical): Devices stay powered almost instantly when mains drops. As a result, connected electronics rarely experience a hard restart.
LED indicators with audible alarm: Shows power status, battery mode, and overload conditions at a glance. This helps you respond before a problem damages equipment.
850VA / 480W capacity: Powers a desktop computer with a monitor, a router, or a CCTV/DVR unit. This gives you enough headroom for typical home or small office setups.
Boost-and-buck AVR: Corrects high or low input voltage without switching to battery. As a result, your battery lasts longer and connected devices stay protected.
Battery health monitoring: Warns you early when the battery needs replacement. This lets you plan maintenance before a failure catches you off guard.
Three-pin Kenyan-standard socket: Connects directly to local devices without adapters. For multiple devices, a quality power extension works off this single outlet.
LED status indicators with audible alarm: Displays power mode, battery mode, and overload conditions at a glance. Consequently, you notice problems before they affect your equipment.
10000VA / 9000W Double-Conversion Capacity: Runs servers, networking racks, or industrial control systems continuously, with zero transfer time between mains and battery power.
Pure Sine Wave Output: Delivers clean, stable power identical to utility supply, which protects sensitive electronics like servers and medical equipment from waveform-related faults.
Cold Start Capability: Powers on directly from battery even without mains power present, useful for emergency deployments or generator-dependent sites.
Hot-Swappable Battery and N+X Parallel Redundancy: Batteries can be replaced without shutting the system down, and up to 4 units can run in parallel for scalable, fault-tolerant capacity.
Smart SNMP Compatibility: Connects via RS232 or USB, and supports an optional SNMP card for remote monitoring, so IT teams can track status without being on-site.
1050VA capacity: Supports desktops, networking gear, and small office electronics together. This means fewer compromises when protecting multiple devices from one unit.
Automatic Voltage Regulation (AVR): Corrects over- and under-voltage conditions without draining the battery. Consequently, your equipment stays protected during minor fluctuations, not just full outages.
Fast transfer time (4–8 ms typical, 13 ms max): Switches to battery quickly enough that most connected devices don't reset. This reduces the risk of losing unsaved work during a power cut.
Overcharge and short-circuit protection: Guards the battery from overcharging and limits current during faults. As a result, the unit protects itself as well as your equipment over the long term.
LED status indicator with advanced power management: Shows battery level, input/output voltage, and load in real time. This makes it easy to spot problems before they affect your devices.
1500VA / 900W Capacity: Supports a desktop computer, monitor, and networking equipment simultaneously, giving small offices dependable coverage during outages.
Automatic Voltage Regulation (AVR): Corrects voltage sags and surges without switching to battery power, therefore preserving battery life and cutting maintenance costs.
Fast Transfer Time (under 10ms): Switches to battery mode quickly enough that most electronics continue running without a visible interruption.
Built-in Surge and Short-Circuit Protection: Fuses and current limiting guard connected devices against electrical faults, so equipment stays protected during voltage spikes.
Maintenance-Free Lead-Acid Battery: Recharges to over 90% within 8 hours, which means the UPS returns to full readiness quickly after an outage.
2000VA / 1200W Capacity: Runs a desktop, monitor, and networking equipment together, giving small offices meaningful headroom over lower-capacity models.
Automatic Voltage Regulation (AVR): Corrects voltage sags and surges without switching to battery mode, therefore preserving battery life and reducing maintenance costs.
Fast Transfer Time (under 10ms): Switches to battery mode quickly enough that most electronics keep running without a visible interruption.
Spike and Surge Suppression: Fuses and current limiting protect connected devices from electrical faults on both mains and battery power.
Maintenance-Free Lead-Acid Battery: Recharges to over 90% within 8 hours, so the UPS returns to full readiness quickly after an outage.
3000VA / 1800W Capacity: Supports multiple devices at once, such as a desktop, monitor, router, and small networking switch, without exceeding load limits quickly.
Wide Input Voltage Range (140–300V): Tolerates a broader range of unstable mains conditions before switching to battery, reducing unnecessary battery cycling.
Fast Transfer Time (4–8ms, 13ms max): Switches to battery mode quickly enough that most connected electronics continue operating without a visible interruption.
Spike and Surge Suppression: Protects connected equipment from electrical faults and voltage spikes on both mains and battery power.
4 Universal Power Outlets: Connects more devices simultaneously than 2- or 3-outlet UPS models, useful for small multi-device setups.