Metal Copper Shielded Casing: The STP construction physically blocks electromagnetic interference (EMI) and crosstalk, maintaining signal integrity in dense cable runs or electrically noisy environments such as server rooms and factory floors.
24K Gold-Plated 3U Contacts: Gold plating on the 8P8C copper pins resists oxidation over time, consequently ensuring low-resistance connections that remain stable across the connector's lifespan.
Gigabit-Rated Performance: Each plug supports Cat 6 STP cable at up to 1000 Mbps, making it a direct fit for Gigabit Ethernet switches, patch panels, and structured wiring systems.
Single- and Multi-Strand Compatibility: The connector accommodates both solid and stranded conductors with a diameter of 1.2 ± 0.02 mm, removing the need to stock separate plugs for different cable constructions.
Transparent Polycarbonate Housing: The clear body allows visual verification of wire pair alignment before crimping, reducing waste terminations and rework on large cable runs.
Gigabit performance across a full 10 m run: Maintains 1000 Mbps throughput and 250 MHz bandwidth along the complete cable length — signal attenuation at 10 m remains far below the Cat 6 specification ceiling, ensuring no degradation compared to shorter leads.
T568B wiring with cross-isolation shielding: The internal cross-separator between twisted pairs controls crosstalk and electromagnetic interference along the longer run, compensating for the increased exposure to interference that extended cable lengths can introduce.
Gold-plated pure copper RJ45 contacts: Corrosion-resistant gold plating on the pin contacts reduces oxidation over time, maintaining connection integrity at both ends — particularly relevant in installations where cables remain permanently seated for months or years.
Snag-less heavy-duty moulded strain relief: The reinforced connector boot protects the cable-to-plug junction against flexing stress during installation routing, reducing the risk of internal wire separation at the most mechanically loaded point.
Backward compatible with Cat 5e and Cat 5: Works directly with existing wall sockets, patch panels, and network switches without adapters, allowing a straightforward upgrade from older cabling on a per-run basis.
Fluke-tested Cat 6 compliance: The cable passes the industry-standard Fluke test for Cat 6 performance parameters, verifying that attenuation, crosstalk, and return loss remain within specification across the full 15 m run — not just at shorter lengths.
1 Gbps throughput at 250 MHz bandwidth: Supports the full Gigabit Ethernet speed range across 10/100/1000Base-T networks, with the 250 MHz operating bandwidth providing headroom above the Cat 5e standard's 100 MHz ceiling for better noise rejection on longer runs.
Cross-isolation internal shielding: The separator between twisted pairs controls near-end crosstalk (NEXT) and electromagnetic interference along the extended cable length — a greater concern at 15 m than at 1–5 m, where cable exposure to interference sources is proportionally higher.
Gold-plated pure copper RJ45 contacts: Corrosion-resistant contacts maintain electrical integrity at both termination points, reducing the risk of connection degradation in permanent installations where connectors remain seated for extended periods.
Backward compatible with Cat 5e and Cat 5 networks: Connects directly to existing wall sockets, patch panels, and switches without adapters, allowing incremental network upgrades run by run.
Gigabit data transfer: Supports 10/100/1000Base-T speeds up to 1 Gbps, eliminating bottlenecks between devices on the same local network.
250 MHz bandwidth: Operates at twice the bandwidth of Cat 5e, reducing crosstalk and system noise for more stable transmission during high-demand tasks such as file transfers or video streaming.
Reinforced RJ45 connectors: The plug ends feature protective moulding that resists damage from repeated insertion and removal — useful in environments where cables are frequently moved or reconfigured.
U/UTP construction with four twisted pairs: The unshielded twisted-pair design manages interference through controlled cable geometry, making it suitable for standard office and home network environments.
Backward compatible with Cat 5e and Cat 5: Works with existing infrastructure, so upgrading to Cat 6 does not require replacing switches, wall ports, or patch panels.
Gigabit-ready performance: Supports 10/100/1000Base-T data rates up to 1 Gbps, delivering full throughput on any Gigabit-capable router or switch without the cable becoming a limiting factor.
250 MHz operating bandwidth: Handles Cat 6's full frequency range, reducing crosstalk and signal interference compared to Cat 5e — particularly useful in environments with multiple cables running in parallel.
Reinforced RJ45 connector boots: Protective moulding around each plug resists damage from bending and repeated connection cycles, maintaining a secure contact even in frequently reconfigured setups.
Four unshielded twisted pairs (U/UTP): Twist geometry controls crosstalk without requiring foil shielding, keeping the cable flexible and easy to route in tight spaces.
Backward compatible with Cat 5e and Cat 5 infrastructure: Works directly with existing wall ports, patch panels, and switches — no adapters or upgrades required when replacing older patch leads.
1 Gbps Gigabit Ethernet support: Handles 10/100/1000Base-T network traffic at full Gigabit speed, ensuring the cable does not throttle throughput on modern routers and switches.
250 MHz operating bandwidth: Operates across Cat 6's full frequency range, controlling crosstalk and system noise across the eight-core twisted-pair construction — particularly relevant when cables run in parallel with power or other data cables.
Cross-isolation signal shielding: The internal cross-separator between wire pairs reduces interference between adjacent pairs, maintaining signal integrity over the full 3 m run without requiring external foil shielding.
Reinforced RJ45 connectors with gold-plated contacts: Connectors use pure copper plated with gold, improving conductivity and resistance to corrosion at the contact points — useful in humid or dusty environments. Breville
Backward compatible with Cat 5e and Cat 5: Plugs directly into existing wall sockets, patch panels, and switches without requiring infrastructure upgrades, making it a straightforward drop-in replacement for older network leads.
Full Gigabit throughput at 5 m: Supports 10/100/1000Base-T speeds up to 1 Gbps across the complete cable length — at 26 AWG and five metres, signal attenuation remains well within the Cat 6 specification's acceptable limits.
250 MHz bandwidth with cross-isolation shielding: The internal cross-separator between twisted pairs controls crosstalk and electromagnetic interference along the run, maintaining signal integrity without requiring foil or braid shielding.
Gold-plated RJ45 connectors (50-micron): Corrosion-resistant gold plating on the contact pins reduces oxidation at the interface, preserving connection quality in environments with humidity or dust exposure over extended use.
Snag-less moulded connector boots: The heavy-duty strain relief moulding protects the cable-to-connector junction against repeated flexing, reducing the risk of internal wire fatigue at the most mechanically stressed point of the cable.
T568B wiring standard with backward compatibility: Wired to the T568B configuration and compatible with Cat 5e and Cat 5 infrastructure — plugs directly into existing wall sockets, patch panels, and switches without adapters.
Gold-Plated 3U 8P8C Contacts: With 8P8C gold-plated contacts, the connectors ensure more stable data transfer and provide a longer lifespan, with a three-pronged chip that keeps contacts closely attached to the wire core for a stable and continuous connection. Itcomp2u
Transparent Polycarbonate Housing: The transparent body makes verifying the wire sequence for T568A and T568B easier, reducing scrapped and wasted crimp attempts — a tangible time-saver on high-volume cable runs. SEATech Systems
Gigabit-Rated Performance: Category 6 performance is rated for a Gigabit Ethernet channel compliant network, with backwards compatibility with Cat 5e stranded or solid cable. Dataworld Kenya
Broad AWG and Cable Type Support: Supports solid or stranded conductors across 23–28 AWG wire gauge, removing the need to stock separate connector types for different cable constructions on the same project. Digital Store
Cost-Effective Bulk Pack: The 100-pack provides enough connectors for a large project or multiple small jobs, with a convenient storage container that protects and stores the modular connectors between uses — a screw-on lid with an integrated handle makes it easy to carry to the job site. Dataworld Kenya
Three functions in one tool: Crimps 8P and 6P modular plugs, strips flat and round cable jacket up to 10 mm diameter, and cuts cable cleanly — consolidating three separate tasks into a single tool and reducing the number of items needed in a network installation toolkit.
Q235 carbon structural steel crimping head: The crimping mechanism uses Q235 steel — a structural-grade carbon steel with well-defined hardness and yield strength — providing repeatable, accurate die engagement across hundreds of crimping cycles without deformation.
SK5 high-hardness steel blades: SK5 tool steel blades maintain edge sharpness through repeated cutting and stripping operations, producing clean, burr-free cuts that reduce the risk of jacket fragments interfering with connector seating.
Labour-saving mechanical joint with TPE grip handles: The ratcheting or lever-assist mechanism reduces the hand force required to complete a crimp, minimising fatigue during extended installation sessions. The TPE (Thermoplastic Elastomer) handle provides a non-slip grip in both dry and slightly damp working conditions.
Broad modular plug compatibility: Works with 8P8C, 8P6C, 8P4C, 8P2C, 6P6C, 6P4C, and 6P2C plug configurations — covering the full range of RJ45 network and RJ11/RJ12 telephone connectors used in structured cabling, VOIP installations, and DSL termination.
Automatic fault detection across eight test types: Runs open circuit, short circuit, crossover, DC line, anode and cathode, and ring signal detection tests automatically — eliminating the need to manually probe individual pins and reducing diagnostic time significantly.
LED status display for immediate visual feedback: Sequential LED indicators illuminate in real time during testing, showing each pin's continuity status at a glance. Faults appear as missing, out-of-sequence, or incorrect LED illumination, making wiring errors straightforward to identify without specialist training.
Broad cable and connector compatibility: Works with RJ45 (8P8C) Ethernet cables from Cat 5 through Cat 7, and RJ11/RJ12 (6P6C) telephone cables — covering the connector types found in virtually all structured wiring installations from the past three decades.
Main unit and detachable remote unit: The remote unit attaches to the far end of the cable under test, allowing the main unit to drive and read continuity across the full cable length. This suits installed cables where both ends are not physically adjacent.
Compact and portable design: At 200 × 150 × 30 mm and 200 g, the NW167 fits in a tool bag or jacket pocket and travels easily between locations — practical for technicians working across multiple sites or floors.
24K Gold-Plated Copper Contacts: Gold-plated pins provide extremely stable and fast signal transmission while resisting oxidation, discolouration, and environmental wear — particularly valuable in wall cavities and ceiling voids where the connection point is not easily re-accessed. SEATech Systems
Gigabit and Beyond: The coupler supports speeds up to 10 Gbps with Cat 7 cables, and maintains full 1 Gbps throughput on Cat 6 infrastructure, so it does not become a bottleneck as network equipment is upgraded. RYANS
TIA/EIA 568-C.2 Compliant: The RJ45 inline jack coupler meets Category 6 performance in compliance with the TIA/EIA 568-C.2 standard, confirming it meets the same electrical specifications as the cable itself. Starlite
Standard Keystone Form Factor: The snap-in keystone profile fits directly into any 110-type wall plate, blank patch panel, or surface mount box, enabling a flush installation without additional hardware or adapters.
Universal Cable Compatibility: Works with Cat 7, Cat 6, Cat 5e, and Cat 5 network patch cords, making it a practical choice for mixed-generation cabling environments across offices, schools, and residential builds. Starlite